Lightweight rope grab device designed to be used in place of prusiks. Versatile and reliable. Works best with a carabiner that has a round cross-section.

For 8 - 11mm rope. Dimensions: 5.5cm H x 3.5cm W x 1.8cm T.

Weight: 39g.

NOTE : Rope damage or breakage can occur at as little as 4kN depending on rope used. Not meant to be shock loaded or to catch a falling load: catastrophic failure can occur.

NOTE All camming and toothed rope grabs and ascenders can cause significant damage to ropes if shock loaded such as when stopping a falling load and must not be used where such events are possible. This damage can occur at forces well below the rated breaking strength of the equipment involved. Rope damage can also occur if force applied to the device exceeds the maximum rated load or if used for applications beyond the operating parameters as stated by the manufacturer.

Ascenders and rope grabs are for use on rope ONLY. They must never be used on cable.